Dodge · 2000–2004
HOW TO RESET THE OIL LIFE ON A DODGE DAKOTA
Oil change light or maintenance reminder on after an oil change? Here's how to reset it on the Dodge Dakota (2000–2004), plus how much oil it takes, the oil type and the oil filter number.
Engines covered
3.9L V6 · 4.7L V8
Model years
RESET STEPS
Stellantis Pedal Sequence · covers model years 2000–2004
Jeep · Dodge · Ram · Chrysler, roughly 2003–2018
- 1
Turn the ignition to ON/RUN without starting the engine.
- 2
Slowly press the accelerator all the way down and release, 3 full times within 10 seconds.
- 3
Watch the cluster: the change-oil message should flash and clear.
- 4
Turn the ignition OFF, then start the engine to confirm.
Oil needed for an oil change
5.0 qt (4.7 L)
Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.
Type of oil
5W-20
Oil filter part number
Mopar MO-090 · MO-339
Common factory part numbers — the right filter can vary by engine. Verify before buying.
BEFORE YOU START
- Only reset the oil life after a real oil and filter change.
- Warm oil is hot — let the engine cool a few minutes before draining.
- Reset resets the internal interval timer; it doesn't change what's in the sump.
DODGE DAKOTA QUESTIONS
+How do I reset the oil life on a Dodge Dakota?
Turn the ignition to ON/RUN without starting the engine. Slowly press the accelerator all the way down and release, 3 full times within 10 seconds. Watch the cluster: the change-oil message should flash and clear. Turn the ignition OFF, then start the engine to confirm.
+How much oil does a Dodge Dakota take?
About 5.0 qt (4.7 L) with a new filter, depending on engine and year. Check the dipstick after filling.
+What type of oil does a Dodge Dakota use?
Commonly 5W-20. Confirm the grade in your owner's manual or on the oil filler cap.
+What oil filter fits a Dodge Dakota?
Common factory part number: Mopar MO-090 · MO-339. The right filter can vary by engine, so confirm before buying.
More answers on our oil change FAQ.