Ford · 1997–2024
HOW TO RESET THE OIL LIFE ON A FORD E-SERIES / ECONOLINE
Oil change light or maintenance reminder on after an oil change? Here's how to reset it on the Ford E-Series / Econoline (1997–2024), plus how much oil it takes, the oil type and the oil filter number.
Engines covered
4.6L V8 · 5.4L V8 · 6.8L V10
Model years
RESET STEPS
Ford Pedal Sequence · covers model years 1997–2024
Ford & Lincoln, roughly 2004–2019 (F-150, Explorer, Escape, Fusion, Mustang…)
- 1
Close all doors and turn the ignition to ON/RUN without starting the engine.
- 2
Fully press and release the accelerator and brake pedals at the same time (some years: accelerator alone). Hold about 2 seconds.
- 3
Repeat for a total of 3 cycles within 10 seconds. Watch the cluster for the oil-life reset message or a flashing oil light.
- 4
Wait a few seconds, then start the engine and confirm 100% oil life.
Oil needed for an oil change
6.0–7.0 qt (5.7–6.6 L)
Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.
Type of oil
5W-20 synthetic blend
Oil filter part number
Motorcraft FL-820S (V8) · FL-500S / FL-400S
Common factory part numbers — the right filter can vary by engine. Verify before buying.
BEFORE YOU START
- Only reset the oil life after a real oil and filter change.
- Warm oil is hot — let the engine cool a few minutes before draining.
- Reset resets the internal interval timer; it doesn't change what's in the sump.
FORD E-SERIES / ECONOLINE QUESTIONS
+How do I reset the oil life on a Ford E-Series / Econoline?
Close all doors and turn the ignition to ON/RUN without starting the engine. Fully press and release the accelerator and brake pedals at the same time (some years: accelerator alone). Hold about 2 seconds. Repeat for a total of 3 cycles within 10 seconds. Watch the cluster for the oil-life reset message or a flashing oil light. Wait a few seconds, then start the engine and confirm 100% oil life.
+How much oil does a Ford E-Series / Econoline take?
About 6.0–7.0 qt (5.7–6.6 L) with a new filter, depending on engine and year. Check the dipstick after filling.
+What type of oil does a Ford E-Series / Econoline use?
Commonly 5W-20 synthetic blend. Confirm the grade in your owner's manual or on the oil filler cap.
+What oil filter fits a Ford E-Series / Econoline?
Common factory part number: Motorcraft FL-820S (V8) · FL-500S / FL-400S. The right filter can vary by engine, so confirm before buying.
More answers on our oil change FAQ.