Ford · 1999–2026
HOW TO RESET THE OIL LIFE ON A FORD SUPER DUTY F-250/F-350
Oil change light or maintenance reminder on after an oil change? Here's how to reset it on the Ford Super Duty F-250/F-350 (1999–2026), plus how much oil it takes, the oil type and the oil filter number.
Engines covered
6.2L V8 · 6.7L Power Stroke · 6.8L V8 · 7.3L V8 · 6.7L Power Stroke
Model years
RESET STEPS
Ford Pedal Sequence · covers model years 1999–2019
Ford & Lincoln, roughly 2004–2019 (F-150, Explorer, Escape, Fusion, Mustang…)
- 1
Close all doors and turn the ignition to ON/RUN without starting the engine.
- 2
Fully press and release the accelerator and brake pedals at the same time (some years: accelerator alone). Hold about 2 seconds.
- 3
Repeat for a total of 3 cycles within 10 seconds. Watch the cluster for the oil-life reset message or a flashing oil light.
- 4
Wait a few seconds, then start the engine and confirm 100% oil life.
Oil needed for an oil change
7.0 qt gas · 13.0 qt diesel (12.3 L)
Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.
Type of oil
5W-20 synthetic blend — diesel engines: 15W-40 / 5W-40 diesel-rated (CK-4)
Oil filter part number
Motorcraft FL-820S (V8) · FL-500S / FL-400S
Common factory part numbers — the right filter can vary by engine. Verify before buying.
RESET STEPS
Ford Instrument Cluster / SYNC Menu · covers model years 2020–2026
Ford & Lincoln, roughly 2020 and newer
- 1
Start the vehicle or turn the ignition to ON/RUN.
- 2
Use the steering-wheel controls to open the instrument cluster menu, then go to SETTINGS → MAINTENANCE (or OIL LIFE).
- 3
Select RESET OIL LIFE and confirm.
- 4
Verify the cluster now reads 100% oil life.
Oil needed for an oil change
7.0–13.0 qt (6.6–12.3 L)
Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.
Type of oil
5W-30 full synthetic (EcoBoost) · 5W-20 / 0W-20 (others) — diesel engines: 15W-40 / 5W-40 diesel-rated (CK-4)
Oil filter part number
Motorcraft FL-500S · FL-910S (EcoBoost 4-cyl)
Common factory part numbers — the right filter can vary by engine. Verify before buying.
BEFORE YOU START
- Only reset the oil life after a real oil and filter change.
- Warm oil is hot — let the engine cool a few minutes before draining.
- Reset resets the internal interval timer; it doesn't change what's in the sump.
FORD SUPER DUTY F-250/F-350 QUESTIONS
+How do I reset the oil life on a Ford Super Duty F-250/F-350?
Close all doors and turn the ignition to ON/RUN without starting the engine. Fully press and release the accelerator and brake pedals at the same time (some years: accelerator alone). Hold about 2 seconds. Repeat for a total of 3 cycles within 10 seconds. Watch the cluster for the oil-life reset message or a flashing oil light. Wait a few seconds, then start the engine and confirm 100% oil life. Other model years use different steps — see the full list on this page.
+How much oil does a Ford Super Duty F-250/F-350 take?
About 7.0 qt gas · 13.0 qt diesel (12.3 L) or 7.0–13.0 qt (6.6–12.3 L) with a new filter, depending on engine and year. Check the dipstick after filling.
+What type of oil does a Ford Super Duty F-250/F-350 use?
Commonly 5W-20 synthetic blend — diesel engines: 15W-40 / 5W-40 diesel-rated (CK-4) or 5W-30 full synthetic (EcoBoost) · 5W-20 / 0W-20 (others) — diesel engines: 15W-40 / 5W-40 diesel-rated (CK-4). Confirm the grade in your owner's manual or on the oil filler cap.
+What oil filter fits a Ford Super Duty F-250/F-350?
Common factory part number: Motorcraft FL-820S (V8) · FL-500S / FL-400S, Motorcraft FL-500S · FL-910S (EcoBoost 4-cyl). The right filter can vary by engine, so confirm before buying.
More answers on our oil change FAQ.