Honda · 2011–2016

HOW TO RESET THE OIL LIFE ON A HONDA CR-Z

Oil change light or maintenance reminder on after an oil change? Here's how to reset it on the Honda CR-Z (2011–2016), plus how much oil it takes, the oil type and the oil filter number.

Engines covered

1.5L Hybrid

Model years

2011–2016

RESET STEPS

Honda Trip-Button Reset · covers model years 2011–2016

Honda & Acura, roughly 2003–2015 clusters

  1. 1

    Turn the ignition to ON/RUN without starting the engine.

  2. 2

    Use the SELECT/RESET (trip) button to page until the wrench / maintenance code (e.g. A1) is displayed.

  3. 3

    Press and hold the button for about 10 seconds until the code flashes, then release.

  4. 4

    Press and hold again for a few seconds until it resets. Start the engine to confirm.

Oil needed for an oil change

3.7 qt (3.5 L)

Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.

Type of oil

0W-20 full synthetic

Oil filter part number

Honda 15400-PLM-A02

Common factory part numbers — the right filter can vary by engine. Verify before buying.

BEFORE YOU START

  • Only reset the oil life after a real oil and filter change.
  • Warm oil is hot — let the engine cool a few minutes before draining.
  • Reset resets the internal interval timer; it doesn't change what's in the sump.

HONDA CR-Z QUESTIONS

+How do I reset the oil life on a Honda CR-Z?

Turn the ignition to ON/RUN without starting the engine. Use the SELECT/RESET (trip) button to page until the wrench / maintenance code (e.g. A1) is displayed. Press and hold the button for about 10 seconds until the code flashes, then release. Press and hold again for a few seconds until it resets. Start the engine to confirm.

+How much oil does a Honda CR-Z take?

About 3.7 qt (3.5 L) with a new filter, depending on engine and year. Check the dipstick after filling.

+What type of oil does a Honda CR-Z use?

Commonly 0W-20 full synthetic. Confirm the grade in your owner's manual or on the oil filler cap.

+What oil filter fits a Honda CR-Z?

Common factory part number: Honda 15400-PLM-A02. The right filter can vary by engine, so confirm before buying.

More answers on our oil change FAQ.