Jeep · 1999–2026
HOW TO RESET THE OIL LIFE ON A JEEP GRAND CHEROKEE
Oil change light or maintenance reminder on after an oil change? Here's how to reset it on the Jeep Grand Cherokee (1999–2026), plus how much oil it takes, the oil type and the oil filter number.
Engines covered
3.6L V6 · 5.7L HEMI · 3.6L V6 · 5.7L HEMI · 4XE PHEV · 4.0L I6 · 4.7L V8
Model years
RESET STEPS
Stellantis Pedal Sequence · covers model years 1999–2018
Jeep · Dodge · Ram · Chrysler, roughly 2003–2018
- 1
Turn the ignition to ON/RUN without starting the engine.
- 2
Slowly press the accelerator all the way down and release, 3 full times within 10 seconds.
- 3
Watch the cluster: the change-oil message should flash and clear.
- 4
Turn the ignition OFF, then start the engine to confirm.
Oil needed for an oil change
5.0–7.0 qt (4.7–6.6 L) · 5.0–6.0 qt (4.7–5.7 L)
Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.
Type of oil
5W-20
Oil filter part number
Mopar MO-090 · MO-339
Common factory part numbers — the right filter can vary by engine. Verify before buying.
RESET STEPS
Stellantis Cluster Menu · covers model years 2019–2026
Jeep · Dodge · Ram · Chrysler, roughly 2019 and newer
- 1
With the vehicle on, use the steering-wheel controls to open the instrument cluster menu.
- 2
Go to VEHICLE INFO → OIL LIFE (or SETTINGS → OIL LIFE RESET).
- 3
Select RESET and confirm.
- 4
Start the engine and verify the message is gone.
Oil needed for an oil change
5.0–7.0 qt (4.7–6.6 L)
Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.
Type of oil
0W-20 or 5W-20 full synthetic (SRT/6.4L: 0W-40)
Oil filter part number
Mopar 68191349AC · MO-090
Common factory part numbers — the right filter can vary by engine. Verify before buying.
BEFORE YOU START
- Only reset the oil life after a real oil and filter change.
- Warm oil is hot — let the engine cool a few minutes before draining.
- Reset resets the internal interval timer; it doesn't change what's in the sump.
JEEP GRAND CHEROKEE QUESTIONS
+How do I reset the oil life on a Jeep Grand Cherokee?
Turn the ignition to ON/RUN without starting the engine. Slowly press the accelerator all the way down and release, 3 full times within 10 seconds. Watch the cluster: the change-oil message should flash and clear. Turn the ignition OFF, then start the engine to confirm. Other model years use different steps — see the full list on this page.
+How much oil does a Jeep Grand Cherokee take?
About 5.0–7.0 qt (4.7–6.6 L) or 5.0–6.0 qt (4.7–5.7 L) with a new filter, depending on engine and year. Check the dipstick after filling.
+What type of oil does a Jeep Grand Cherokee use?
Commonly 5W-20 or 0W-20 or 5W-20 full synthetic (SRT/6.4L: 0W-40). Confirm the grade in your owner's manual or on the oil filler cap.
+What oil filter fits a Jeep Grand Cherokee?
Common factory part number: Mopar MO-090 · MO-339, Mopar 68191349AC · MO-090. The right filter can vary by engine, so confirm before buying.
More answers on our oil change FAQ.