Mazda · 2004–2026
HOW TO RESET THE OIL LIFE ON A MAZDA MAZDA3
Oil change light or maintenance reminder on after an oil change? Here's how to reset it on the Mazda Mazda3 (2004–2026), plus how much oil it takes, the oil type and the oil filter number.
Engines covered
2.0L I4 · 2.5L I4 · 2.5L Turbo · 2.0L I4 · 2.3L I4 · 2.3L Turbo
Model years
RESET STEPS
Mazda Maintenance Monitor · covers model years 2010–2026
Mazda, roughly 2010 and newer
- 1
With the ignition on, press the INFO or MENU button on the cluster/steering wheel until MAINTENANCE is displayed.
- 2
Select RESET, choose OIL CHANGE, and press and hold to reset the reminder.
- 3
Newer models with a center display: SETTINGS → MAINTENANCE → OIL CHANGE → RESET.
- 4
Start the engine and verify the wrench indicator is off.
Oil needed for an oil change
4.3–4.9 qt (4.1–4.6 L)
Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.
Type of oil
5W-20
Oil filter part number
Mazda PE01-14-302B · LF10-14-302
Common factory part numbers — the right filter can vary by engine. Verify before buying.
RESET STEPS
Mazda Trip Reset (older clusters) · covers model years 2004–2009
Mazda, before ~2010
- 1
Turn the ignition to ON/RUN without starting the engine.
- 2
With the trip meter displayed, press and hold the trip/RESET stem.
- 3
Keep holding until the service reminder light flashes and resets (up to ~10 seconds).
- 4
Release, then start the engine to confirm.
Oil needed for an oil change
4.0–6.0 qt (3.8–5.7 L)
Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.
Type of oil
5W-20
Oil filter part number
Mazda PE01-14-302B · LF10-14-302
Common factory part numbers — the right filter can vary by engine. Verify before buying.
BEFORE YOU START
- Only reset the oil life after a real oil and filter change.
- Warm oil is hot — let the engine cool a few minutes before draining.
- Reset resets the internal interval timer; it doesn't change what's in the sump.
MAZDA MAZDA3 QUESTIONS
+How do I reset the oil life on a Mazda Mazda3?
With the ignition on, press the INFO or MENU button on the cluster/steering wheel until MAINTENANCE is displayed. Select RESET, choose OIL CHANGE, and press and hold to reset the reminder. Newer models with a center display: SETTINGS → MAINTENANCE → OIL CHANGE → RESET. Start the engine and verify the wrench indicator is off. Other model years use different steps — see the full list on this page.
+How much oil does a Mazda Mazda3 take?
About 4.3–4.9 qt (4.1–4.6 L) or 4.0–6.0 qt (3.8–5.7 L) with a new filter, depending on engine and year. Check the dipstick after filling.
+What type of oil does a Mazda Mazda3 use?
Commonly 5W-20. Confirm the grade in your owner's manual or on the oil filler cap.
+What oil filter fits a Mazda Mazda3?
Common factory part number: Mazda PE01-14-302B · LF10-14-302. The right filter can vary by engine, so confirm before buying.
More answers on our oil change FAQ.