Mazda · 2004–2011
HOW TO RESET THE OIL LIFE ON A MAZDA RX-8
Oil change light or maintenance reminder on after an oil change? Here's how to reset it on the Mazda RX-8 (2004–2011), plus how much oil it takes, the oil type and the oil filter number.
Engines covered
1.3L Rotary
Model years
RESET STEPS
Mazda Trip Reset (older clusters) · covers model years 2004–2011
Mazda, before ~2010
- 1
Turn the ignition to ON/RUN without starting the engine.
- 2
With the trip meter displayed, press and hold the trip/RESET stem.
- 3
Keep holding until the service reminder light flashes and resets (up to ~10 seconds).
- 4
Release, then start the engine to confirm.
Oil needed for an oil change
3.7 qt (3.5 L)
Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.
Type of oil
5W-20
Oil filter part number
Mazda PE01-14-302B · LF10-14-302
Common factory part numbers — the right filter can vary by engine. Verify before buying.
BEFORE YOU START
- Only reset the oil life after a real oil and filter change.
- Warm oil is hot — let the engine cool a few minutes before draining.
- Reset resets the internal interval timer; it doesn't change what's in the sump.
MAZDA RX-8 QUESTIONS
+How do I reset the oil life on a Mazda RX-8?
Turn the ignition to ON/RUN without starting the engine. With the trip meter displayed, press and hold the trip/RESET stem. Keep holding until the service reminder light flashes and resets (up to ~10 seconds). Release, then start the engine to confirm.
+How much oil does a Mazda RX-8 take?
About 3.7 qt (3.5 L) with a new filter, depending on engine and year. Check the dipstick after filling.
+What type of oil does a Mazda RX-8 use?
Commonly 5W-20. Confirm the grade in your owner's manual or on the oil filler cap.
+What oil filter fits a Mazda RX-8?
Common factory part number: Mazda PE01-14-302B · LF10-14-302. The right filter can vary by engine, so confirm before buying.
More answers on our oil change FAQ.