Mercury · 2004–2007
HOW TO RESET THE OIL LIFE ON A MERCURY MONTEREY
Oil change light or maintenance reminder on after an oil change? Here's how to reset it on the Mercury Monterey (2004–2007), plus how much oil it takes, the oil type and the oil filter number.
Engines covered
4.2L V6
Model years
RESET STEPS
Ford Pedal Sequence · covers model years 2004–2007
Ford & Lincoln, roughly 2004–2019 (F-150, Explorer, Escape, Fusion, Mustang…)
- 1
Close all doors and turn the ignition to ON/RUN without starting the engine.
- 2
Fully press and release the accelerator and brake pedals at the same time (some years: accelerator alone). Hold about 2 seconds.
- 3
Repeat for a total of 3 cycles within 10 seconds. Watch the cluster for the oil-life reset message or a flashing oil light.
- 4
Wait a few seconds, then start the engine and confirm 100% oil life.
Oil needed for an oil change
5.0 qt (4.7 L)
Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.
BEFORE YOU START
- Only reset the oil life after a real oil and filter change.
- Warm oil is hot — let the engine cool a few minutes before draining.
- Reset resets the internal interval timer; it doesn't change what's in the sump.
MERCURY MONTEREY QUESTIONS
+How do I reset the oil life on a Mercury Monterey?
Close all doors and turn the ignition to ON/RUN without starting the engine. Fully press and release the accelerator and brake pedals at the same time (some years: accelerator alone). Hold about 2 seconds. Repeat for a total of 3 cycles within 10 seconds. Watch the cluster for the oil-life reset message or a flashing oil light. Wait a few seconds, then start the engine and confirm 100% oil life.
+How much oil does a Mercury Monterey take?
About 5.0 qt (4.7 L) with a new filter, depending on engine and year. Check the dipstick after filling.
More answers on our oil change FAQ.