Mitsubishi · 2004–2011
HOW TO RESET THE OIL LIFE ON A MITSUBISHI ENDEAVOR
Oil change light or maintenance reminder on after an oil change? Here's how to reset it on the Mitsubishi Endeavor (2004–2011), plus how much oil it takes, the oil type and the oil filter number.
Engines covered
3.8L V6
Model years
RESET STEPS
Mitsubishi Reminder Reset · covers model years 2004–2011
Mitsubishi, roughly 2011 and newer
- 1
With the ignition ON, use the cluster / trip buttons until the service reminder is displayed.
- 2
Press and hold the SELECT/RESET button until the reminder resets.
- 3
Start the engine and verify.
Oil needed for an oil change
4.6 qt (4.4 L)
Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.
Type of oil
0W-20 / 5W-30
Oil filter part number
Mitsubishi MZ690115 · 1230A182
Common factory part numbers — the right filter can vary by engine. Verify before buying.
BEFORE YOU START
- Only reset the oil life after a real oil and filter change.
- Warm oil is hot — let the engine cool a few minutes before draining.
- Reset resets the internal interval timer; it doesn't change what's in the sump.
MITSUBISHI ENDEAVOR QUESTIONS
+How do I reset the oil life on a Mitsubishi Endeavor?
With the ignition ON, use the cluster / trip buttons until the service reminder is displayed. Press and hold the SELECT/RESET button until the reminder resets. Start the engine and verify.
+How much oil does a Mitsubishi Endeavor take?
About 4.6 qt (4.4 L) with a new filter, depending on engine and year. Check the dipstick after filling.
+What type of oil does a Mitsubishi Endeavor use?
Commonly 0W-20 / 5W-30. Confirm the grade in your owner's manual or on the oil filler cap.
+What oil filter fits a Mitsubishi Endeavor?
Common factory part number: Mitsubishi MZ690115 · 1230A182. The right filter can vary by engine, so confirm before buying.
More answers on our oil change FAQ.