Nissan · 2004–2026
HOW TO RESET THE OIL LIFE ON A NISSAN ARMADA
Oil change light or maintenance reminder on after an oil change? Here's how to reset it on the Nissan Armada (2004–2026), plus how much oil it takes, the oil type and the oil filter number.
Engines covered
5.6L V8
Model years
RESET STEPS
Nissan Cluster Menu · covers model years 2017–2026
Nissan & Infiniti, roughly 2013 and newer
- 1
With the vehicle on, use the steering-wheel controls to open the cluster menu.
- 2
Go to MAINTENANCE (or SETTINGS → MAINTENANCE) → OIL & FILTER (or OIL).
- 3
Scroll to RESET, select it, and confirm.
- 4
Start the engine and verify.
Oil needed for an oil change
6.5 qt (6.2 L)
Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.
Type of oil
0W-20 full synthetic (VC-Turbo/V6 turbo: 0W-20 or 5W-30)
Oil filter part number
Nissan 15208-65F0E · 15208-9E01A
Common factory part numbers — the right filter can vary by engine. Verify before buying.
RESET STEPS
Nissan Pedal Sequence · covers model years 2004–2015
Nissan & Infiniti, roughly 2002–2012
- 1
Turn the ignition to ON/RUN without starting the engine.
- 2
Fully press and release the accelerator pedal 3 times within about 5 seconds.
- 3
Wait for the oil/filter reminder to flash, then turn the ignition OFF.
- 4
Start the engine and confirm the reminder is cleared.
Oil needed for an oil change
6.5 qt (6.2 L)
Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.
Type of oil
5W-30
Oil filter part number
Nissan 15208-65F0E · 15208-9E01A
Common factory part numbers — the right filter can vary by engine. Verify before buying.
BEFORE YOU START
- Only reset the oil life after a real oil and filter change.
- Warm oil is hot — let the engine cool a few minutes before draining.
- Reset resets the internal interval timer; it doesn't change what's in the sump.
NISSAN ARMADA QUESTIONS
+How do I reset the oil life on a Nissan Armada?
With the vehicle on, use the steering-wheel controls to open the cluster menu. Go to MAINTENANCE (or SETTINGS → MAINTENANCE) → OIL & FILTER (or OIL). Scroll to RESET, select it, and confirm. Start the engine and verify. Other model years use different steps — see the full list on this page.
+How much oil does a Nissan Armada take?
About 6.5 qt (6.2 L) with a new filter, depending on engine and year. Check the dipstick after filling.
+What type of oil does a Nissan Armada use?
Commonly 0W-20 full synthetic (VC-Turbo/V6 turbo: 0W-20 or 5W-30) or 5W-30. Confirm the grade in your owner's manual or on the oil filler cap.
+What oil filter fits a Nissan Armada?
Common factory part number: Nissan 15208-65F0E · 15208-9E01A. The right filter can vary by engine, so confirm before buying.
More answers on our oil change FAQ.