Toyota · 2004–2026
HOW TO RESET THE OIL LIFE ON A TOYOTA SIENNA
Oil change light or maintenance reminder on after an oil change? Here's how to reset it on the Toyota Sienna (2004–2026), plus how much oil it takes, the oil type and the oil filter number.
Engines covered
3.5L V6 · 3.5L V6 · 2.5L Hybrid
Model years
RESET STEPS
Toyota Trip-Button Reset · covers model years 2004–2013
Toyota & Lexus, roughly 2004–2013 clusters
- 1
With the ignition OFF, make sure the multi-information display is showing ODO (odometer), not TRIP A or TRIP B.
- 2
Turn the ignition to ON/RUN while pressing and holding the TRIP/ODO (RESET) stem or button.
- 3
Keep holding until the odometer reads 000000 and the maintenance light stops flashing — up to about 10 seconds.
- 4
Release, then start the engine and confirm the wrench light is off.
Oil needed for an oil change
6.4 qt (6.1 L)
Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.
Type of oil
5W-30 conventional / synthetic blend
Oil filter part number
Toyota 90915-YZZF2 (spin-on) · 90915-YZZD1
Common factory part numbers — the right filter can vary by engine. Verify before buying.
RESET STEPS
Toyota Multi-Information Menu · covers model years 2014–2026
Toyota & Lexus, roughly 2014 and newer
- 1
With the vehicle on (engine off is fine), use the steering-wheel menu buttons or the center touchscreen.
- 2
Open SETTINGS → VEHICLE (CUSTOMIZATION) → MAINTENANCE (or SERVICE).
- 3
Scroll to OIL MAINTENANCE, select RESET (or DATA RESET), and confirm.
- 4
Start the engine and confirm the maintenance light/wrench is gone.
Oil needed for an oil change
6.4–7.0 qt (6.1–6.6 L)
Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.
Type of oil
0W-20 full synthetic (some hybrids/newer: 0W-16)
Oil filter part number
Toyota 04152-YZZA1 (cartridge) · 90915-YZZF2 (spin-on)
Common factory part numbers — the right filter can vary by engine. Verify before buying.
BEFORE YOU START
- Only reset the oil life after a real oil and filter change.
- Warm oil is hot — let the engine cool a few minutes before draining.
- Reset resets the internal interval timer; it doesn't change what's in the sump.
TOYOTA SIENNA QUESTIONS
+How do I reset the oil life on a Toyota Sienna?
With the ignition OFF, make sure the multi-information display is showing ODO (odometer), not TRIP A or TRIP B. Turn the ignition to ON/RUN while pressing and holding the TRIP/ODO (RESET) stem or button. Keep holding until the odometer reads 000000 and the maintenance light stops flashing — up to about 10 seconds. Release, then start the engine and confirm the wrench light is off. Other model years use different steps — see the full list on this page.
+How much oil does a Toyota Sienna take?
About 6.4 qt (6.1 L) or 6.4–7.0 qt (6.1–6.6 L) with a new filter, depending on engine and year. Check the dipstick after filling.
+What type of oil does a Toyota Sienna use?
Commonly 5W-30 conventional / synthetic blend or 0W-20 full synthetic (some hybrids/newer: 0W-16). Confirm the grade in your owner's manual or on the oil filler cap.
+What oil filter fits a Toyota Sienna?
Common factory part number: Toyota 90915-YZZF2 (spin-on) · 90915-YZZD1, Toyota 04152-YZZA1 (cartridge) · 90915-YZZF2 (spin-on). The right filter can vary by engine, so confirm before buying.
More answers on our oil change FAQ.