BMW · 2013–2026

HOW TO RESET THE OIL LIFE ON A BMW X1

Oil change light or maintenance reminder on after an oil change? Here's how to reset it on the BMW X1 (2013–2026), plus how much oil it takes, the oil type and the oil filter number.

Engines covered

2.0L Turbo

Model years

2013–2026

RESET STEPS

BMW Service Menu · covers model years 2013–2026

BMW, roughly 2004 and newer

1
With the ignition ON (engine off), open the vehicle-status / SERVICE menu in the cluster or iDrive.
2
Scroll to ENGINE OIL and select RESET.
3
Hold OK / confirm until the service interval resets.
4
Repeat for FRONT BRAKE or other items if you serviced them at the same time.

Oil needed for an oil change

4.6–5.7 qt (4.4–5.4 L)

Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.

Type of oil

0W-30 / 5W-30 full synthetic (BMW LL-01 / LL-17FE)

Oil filter part number

BMW 11427953129 · 11428575211

Common factory part numbers — the right filter can vary by engine. Verify before buying.

TIRES & WHEELS

Lug nut torque

89–103 ft-lb (120–140 N·m)

Tighten in a star pattern; re-check after 50–100 miles.

Drivetrain

RWD with 4WD / AWD on many trims

Rearward cross (RWD / 4WD)

Rear tires move straight forward to the front on the same side.
Front tires cross to the rear: left front → right rear, right front → left rear.

X-pattern (AWD)

Every tire crosses diagonally: left front ↔ right rear, right front ↔ left rear.
Keep all four tires within the same tread depth (AWD systems are sensitive to mismatched sizes).

Directional or staggered tires use different rules — see all rotation patterns.

TPMS reset · Reset in iDrive / RDC menu

1
Set all tires to the door-jamb pressure.
2
Start the engine (don't drive). In iDrive: Vehicle Status → Tire Pressure Monitor → Perform Reset. Older models: hold the reset button or use the cluster stalk menu.
3
Drive off; the reset completes after a few minutes of driving.

Torque, drivetrain and TPMS info are common values for this model family. Verify in your owner's manual or service info before working on the vehicle.

BEFORE YOU START

Only reset the oil life after a real oil and filter change.
Warm oil is hot — let the engine cool a few minutes before draining.
Reset resets the internal interval timer; it doesn't change what's in the sump.

BMW X1 QUESTIONS

+How do I reset the oil life on a BMW X1?

With the ignition ON (engine off), open the vehicle-status / SERVICE menu in the cluster or iDrive. Scroll to ENGINE OIL and select RESET. Hold OK / confirm until the service interval resets. Repeat for FRONT BRAKE or other items if you serviced them at the same time.

+How much oil does a BMW X1 take?

About 4.6–5.7 qt (4.4–5.4 L) with a new filter, depending on engine and year. Check the dipstick after filling.

+What type of oil does a BMW X1 use?

Commonly 0W-30 / 5W-30 full synthetic (BMW LL-01 / LL-17FE). Confirm the grade in your owner's manual or on the oil filler cap.

+What oil filter fits a BMW X1?

Common factory part number: BMW 11427953129 · 11428575211. The right filter can vary by engine, so confirm before buying.