Ford · 2011–2019
HOW TO RESET THE OIL LIFE ON A FORD FIESTA
Oil change light or maintenance reminder on after an oil change? Here's how to reset it on the Ford Fiesta (2011–2019), plus how much oil it takes, the oil type and the oil filter number.
Engines covered
1.6L I4 · 1.0L Turbo
Model years
RESET STEPS
Ford Instrument Cluster / SYNC Menu · covers model years 2011–2019
Ford & Lincoln, roughly 2020 and newer
- 1
Start the vehicle or turn the ignition to ON/RUN.
- 2
Use the steering-wheel controls to open the instrument cluster menu, then go to SETTINGS → MAINTENANCE (or OIL LIFE).
- 3
Select RESET OIL LIFE and confirm.
- 4
Verify the cluster now reads 100% oil life.
Oil needed for an oil change
4.3 qt (4.1 L)
Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.
Type of oil
5W-30 full synthetic (EcoBoost) · 5W-20 / 0W-20 (others)
Oil filter part number
Motorcraft FL-500S · FL-910S (EcoBoost 4-cyl)
Common factory part numbers — the right filter can vary by engine. Verify before buying.
TIRES & WHEELS
Lug nut torque
100 ft-lb (135 N·m)
Tighten in a star pattern; re-check after 50–100 miles.
Drivetrain
FWD with AWD on many trims
Forward cross (FWD)
- Front tires move straight back to the rear on the same side.
- Rear tires cross to the front: left rear → right front, right rear → left front.
X-pattern (AWD)
- Every tire crosses diagonally: left front ↔ right rear, right front ↔ left rear.
- Keep all four tires within the same tread depth (AWD systems are sensitive to mismatched sizes).
Directional or staggered tires use different rules — see all rotation patterns.
TPMS reset · Sensor relearn with TPMS tool
- 1
Set all tires to the door-jamb pressure.
- 2
Ignition off. Turn the key from OFF to RUN three times, ending in RUN. Press and release the brake, then cycle OFF to RUN three more times. The horn sounds once (training mode).
- 3
Hold a TPMS tool against the left front tire sidewall at the valve stem and activate it until the horn chirps.
- 4
Repeat for right front, right rear and left rear. A double chirp after the last wheel means it's done.
Torque, drivetrain and TPMS info are common values for this model family. Verify in your owner's manual or service info before working on the vehicle.
BEFORE YOU START
- Only reset the oil life after a real oil and filter change.
- Warm oil is hot — let the engine cool a few minutes before draining.
- Reset resets the internal interval timer; it doesn't change what's in the sump.
FORD FIESTA QUESTIONS
+How do I reset the oil life on a Ford Fiesta?
Start the vehicle or turn the ignition to ON/RUN. Use the steering-wheel controls to open the instrument cluster menu, then go to SETTINGS → MAINTENANCE (or OIL LIFE). Select RESET OIL LIFE and confirm. Verify the cluster now reads 100% oil life.
+How much oil does a Ford Fiesta take?
About 4.3 qt (4.1 L) with a new filter, depending on engine and year. Check the dipstick after filling.
+What type of oil does a Ford Fiesta use?
Commonly 5W-30 full synthetic (EcoBoost) · 5W-20 / 0W-20 (others). Confirm the grade in your owner's manual or on the oil filler cap.
+What oil filter fits a Ford Fiesta?
Common factory part number: Motorcraft FL-500S · FL-910S (EcoBoost 4-cyl). The right filter can vary by engine, so confirm before buying.
More answers on our oil change FAQ.