Honda · 2003–2026
HOW TO RESET THE OIL LIFE ON A HONDA PILOT
Oil change light or maintenance reminder on after an oil change? Here's how to reset it on the Honda Pilot (2003–2026), plus how much oil it takes, the oil type and the oil filter number.
Engines covered
3.5L V6
Model years
RESET STEPS
Honda Trip-Button Reset · covers model years 2003–2015
Honda & Acura, roughly 2003–2015 clusters
- 1
Turn the ignition to ON/RUN without starting the engine.
- 2
Use the SELECT/RESET (trip) button to page until the wrench / maintenance code (e.g. A1) is displayed.
- 3
Press and hold the button for about 10 seconds until the code flashes, then release.
- 4
Press and hold again for a few seconds until it resets. Start the engine to confirm.
Oil needed for an oil change
4.6–5.0 qt (4.4–4.7 L)
Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.
Type of oil
5W-20
Oil filter part number
Honda 15400-PLM-A02
Common factory part numbers — the right filter can vary by engine. Verify before buying.
RESET STEPS
Honda Display Audio Menu · covers model years 2016–2026
Honda & Acura, roughly 2016 and newer
- 1
With the vehicle on, open SETTINGS → VEHICLE → MAINTENANCE INFORMATION on the display.
- 2
Scroll to the item you serviced (e.g. OIL, OIL FILTER, TIRE ROTATION), press RESET, and confirm.
- 3
Turn the vehicle off, then back on, and verify the maintenance minder is cleared.
Oil needed for an oil change
5.7 qt (5.4 L)
Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.
Type of oil
0W-20 full synthetic
Oil filter part number
Honda 15400-PLM-A02
Common factory part numbers — the right filter can vary by engine. Verify before buying.
BEFORE YOU START
- Only reset the oil life after a real oil and filter change.
- Warm oil is hot — let the engine cool a few minutes before draining.
- Reset resets the internal interval timer; it doesn't change what's in the sump.
HONDA PILOT QUESTIONS
+How do I reset the oil life on a Honda Pilot?
Turn the ignition to ON/RUN without starting the engine. Use the SELECT/RESET (trip) button to page until the wrench / maintenance code (e.g. A1) is displayed. Press and hold the button for about 10 seconds until the code flashes, then release. Press and hold again for a few seconds until it resets. Start the engine to confirm. Other model years use different steps — see the full list on this page.
+How much oil does a Honda Pilot take?
About 4.6–5.0 qt (4.4–4.7 L) or 5.7 qt (5.4 L) with a new filter, depending on engine and year. Check the dipstick after filling.
+What type of oil does a Honda Pilot use?
Commonly 5W-20 or 0W-20 full synthetic. Confirm the grade in your owner's manual or on the oil filler cap.
+What oil filter fits a Honda Pilot?
Common factory part number: Honda 15400-PLM-A02. The right filter can vary by engine, so confirm before buying.
More answers on our oil change FAQ.