Subaru · 2013–2026

HOW TO RESET THE OIL LIFE ON A SUBARU BRZ

Oil change light or maintenance reminder on after an oil change? Here's how to reset it on the Subaru BRZ (2013–2026), plus how much oil it takes, the oil type and the oil filter number.

Engines covered

2.0L H4 · 2.4L H4

Model years

2013–2026

RESET STEPS

Subaru Cluster Settings Menu · covers model years 2013–2026

Subaru, roughly 2005 and newer

1
With the ignition ON (engine off), use the steering-wheel INFO buttons to open the cluster settings menu.
2
Go to SET → MAINTENANCE (SERVICE) → OIL CHANGE (or ENGINE OIL).
3
Press and hold ENTER/SET until the value resets, then confirm.
4
Start the engine and verify the service light is off.

Oil needed for an oil change

4.4–4.9 qt (4.2–4.6 L)

Capacity with a new filter. Verify the exact amount and oil grade (viscosity) in your owner's manual before filling.

Type of oil

0W-20 full synthetic (turbo: 5W-30)

Oil filter part number

Subaru 15208AA15A · 15208AA170

Common factory part numbers — the right filter can vary by engine. Verify before buying.

TIRES & WHEELS

Lug nut torque

89 ft-lb (120 N·m)

Tighten in a star pattern; re-check after 50–100 miles.

Drivetrain

RWD with 4WD / AWD on many trims

Rearward cross (RWD / 4WD)

Rear tires move straight forward to the front on the same side.
Front tires cross to the rear: left front → right rear, right front → left rear.

X-pattern (AWD)

Every tire crosses diagonally: left front ↔ right rear, right front ↔ left rear.
Keep all four tires within the same tread depth (AWD systems are sensitive to mismatched sizes).

Directional or staggered tires use different rules — see all rotation patterns.

TPMS reset · Automatic relearn by driving

1
Set all tires (cold) to the door-jamb pressure.
2
Drive above 20 mph for about 10–20 minutes; the light turns off once sensors are read.
3
New sensors must be registered with a TPMS tool.

Torque, drivetrain and TPMS info are common values for this model family. Verify in your owner's manual or service info before working on the vehicle.

BEFORE YOU START

Only reset the oil life after a real oil and filter change.
Warm oil is hot — let the engine cool a few minutes before draining.
Reset resets the internal interval timer; it doesn't change what's in the sump.

SUBARU BRZ QUESTIONS

+How do I reset the oil life on a Subaru BRZ?

With the ignition ON (engine off), use the steering-wheel INFO buttons to open the cluster settings menu. Go to SET → MAINTENANCE (SERVICE) → OIL CHANGE (or ENGINE OIL). Press and hold ENTER/SET until the value resets, then confirm. Start the engine and verify the service light is off.

+How much oil does a Subaru BRZ take?

About 4.4–4.9 qt (4.2–4.6 L) with a new filter, depending on engine and year. Check the dipstick after filling.

+What type of oil does a Subaru BRZ use?

Commonly 0W-20 full synthetic (turbo: 5W-30). Confirm the grade in your owner's manual or on the oil filler cap.

+What oil filter fits a Subaru BRZ?

Common factory part number: Subaru 15208AA15A · 15208AA170. The right filter can vary by engine, so confirm before buying.